top of page
SHAVED ICE ICON.png
SHAVED ICE ICON.png
SHAVED ICE ICON.png
Southern Snow Shaved Ice (7).jpg

SOUTHERN SNOW SUPPLIES

Buy Manufacturer Direct. Shaved ice machines, flavors & more!
 

SOUTHERN SNOW LOGO LAB.png

SOUTHERN SNOW FLAVOR POURERS

  • SPEED POURERS have a larger opening to pour thicker syrups. Colors available are dark sparkle red and fluorescent red.

 

  • HARD POURERS hard extension is used to poke holes for the syrup to penetrate the ice. Colors available are red and blue.

 

  • NIGHTCAPS fit on pourers and speed pourers to keep ants and fruit flies out of the fifth glass bottles overnight

11.png

SOUTHERN SNOW DISPENSERS

  • 1 ½ GALLON ROUND SYRUP DISPENSER delivers syrup directly to the snowball. The variable flow of the spigot is faster than the fifth glass bottles with pourers. Flavored syrup is usually prepared by the gallon and easily fits into the 1 ½ gallon dispenser when depleted to less than one-half gallon. Pouring one gallon into the syrup dispenser replaces the need to fill five-fifth glass bottles. The container is 7 ¾" tall and 10 ¼" at the widest point - handle to handle. The standard spigot has a lock open position. Self-closing non-locking spigot handles is an option.

 

  • 2 GALLON ROUND SYRUP DISPENSER is 10 ½" tall and 10 ¼" at the widest point - handle to handle.

 

  • 5 GALLON ROUND SYRUP DISPENSER is 13 ½" tall and 13 ¾" at the widest point - handle to handle. This dispenser is sometimes used to fill fifth glass bottles with simple syrup.

10.png

SOUTHERN SNOW ICE MOLDS

  • LARGE RECTANGLE ICE MOLD for making ice to use in the Southern Snow® Machine. The approximate inside mold dimensions are 14 ½" x 5 ½" x 6 ½". There is a ¾" lip around the top of the mold. Pour 1 ½ gallons of water into the mold or water to the height of 4 ½". This will produce a 12 ½ pound block. Ice will have less cracks or splitting if the freezer is set at plus 5 degrees rather than minus 5 degrees or below. These ice molds can supplement your ice needs. Approximately 18 twelve ounce snowballs are made from one block. These blocks may take several days to freeze in a normal freezer.

  • SMALL RECTANGLE ICE MOLD for making ice to use in the Southern Snow® Machine. The approximate inside mold dimensions are 11 ½" x 5 ½" x 5 ½". There is a ¾" lip around the top of the mold. This will produce a 9 pound block. This mold will produce approximately 13 twelve ounce snowballs.

  • ​ROUND ICE MOLD for making ice to use in the Hatsuyuki HF500E, Swan SI-100E and Fujimarca MC-709SE. The mold dimensions are 8" dia. x 8 ¼" height. Pour one gallon of water into the mold or water to the height of 5 ¾". This will produce an 8 1/3-pound block. Ice will have less cracks or splitting if the freezer is set at plus 5 degrees rather than minus 5 degrees or below. These ice molds can supplement your ice needs. Approximately 8 twelve ounce snowballs are made from one block. These blocks may take several days to freeze in a normal freezer.

SOUTHERN SNOW NEW ORLEANS SNOBALL MACHINES SHAVED ICED PRODUCTS.png

ADDITIONAL SUPPLIES

MIXING PADDLE is 40" long with a 4 ½" by 7' paddle. Plastic or Stainless.

​​

SPIGOT requires a ¾" hole. This standard spigot has a lock open position and is the replacement spigot for dispensers and mixing tanks. Multiple lock-open spigots in the same tank will produce a bottling machine

​​

PUMP dispenses one-ounce servings of flavor concentrate to prepare snowball syrup. The pump fits one-gallon plastic jugs with a 38mm/400 size cap.

12.png
Southern Snow Shaved Ice (4).jpg
bottom of page